Top 7 E-Bike Accessories Every Rider in Australia Should Have

If you want the best value and safety from your electric bicycle, start with the right e-bike accessories. The essentials below cover Australian legal requirements, day-to-day practicality, and delivery-friendly upgrades. From lights that meet road rules to locks that deter theft, each recommendation includes specs, sizes, and setup tips to help you choose fast. Whether you ride a commuter, cargo rig, or fat-tyre model, these picks will make your rides safer, smoother, and easier to maintain. Read on to see what to buy first and how to fit it correctly.

1. Australian Standard helmet and eyewear

A compliant helmet is mandatory in Australia. Look for the AS/NZS 2063 marking for legal use and proven impact protection.

• Fit: The helmet should sit level, low on the forehead, with minimal movement. Use the dial adjuster and Y-strap splitters to centre straps under the ears.
• Tech to consider: MIPS or similar slip-plane systems reduce rotational forces in angled impacts.
• Visors and eyewear: Clear or photochromic lenses help with wind, insects, and debris at e-bike speeds.
• Price range: AUD $80–$280 for quality lids.
• Lifespan: Replace after any crash or every 5 years, whichever comes first.

Tip: Heavier e-bikes stop slower. A well-fitted helmet plus good glasses is a smart safety stack for urban and off-road use.

2. High-output lights and legal reflectors

Australian road rules require at night a white front light, a red rear light, and a red rear reflector. Lights must be visible at 200 metres. Flashing modes are generally permitted.

• Front light: 500–1000 lumens for unlit paths, 200–500 lumens for lit streets. Use a cut-off beam to reduce glare for oncoming traffic.
• Rear light: 20–100 lumens with a steady plus daytime flash mode. Mount high and unobstructed.
• Battery and charging: USB-C is best. Runtime of 2–8 hours depending on mode and output.
• Weather resistance: IPX4 or higher for year-round commuting.
• Mounting: 22.2 mm bars for small lights, 31.8 mm or fork crown mounts for larger units. Seatpost or rack-mount tails are both fine.
• Price range: AUD $40–$200 per light.

Warning: Aim your front light slightly down and right to avoid dazzling. Clean lenses weekly for maximum visibility.

3. Heavy-duty lock and smart security

E-bikes are prime theft targets. Use a high-grade lock and secure both frame and a wheel.

• Standards: Look for Sold Secure Gold or Diamond, or ART 2–3 star ratings.
• U-locks and chains: 13–18 mm hardened shackles resist bolt cutters. Pair a U-lock with a 10 mm chain or cable for the second wheel.
• Technique: Lock through the frame and a fixed object. Keep the lock off the ground to reduce leverage attacks.
• Security add-ons: Hex skewers or locking axle nuts, and discreet GPS trackers for recovery.
• Mounting: Frame mounts use M5 bolts at 4–6 Nm. Add threadlocker to prevent rattles.
• Price range: AUD $100–$300 for primary locks.

Delivery tip: Remove the battery and display when you leave the bike for longer stops.

4. Mirrors and a legal bell for situational awareness

A working bell or similar warning device is legally required on Australian bicycles. A mirror is not required but is highly recommended for e-bike speeds.

• Mirror placement: Left side is best for Australia. Bar-end mirrors offer a wide, stable view.
• Compatibility: Common bar sizes are 22.2 mm for grips and 31.8 mm for centres.
• Lens material: Glass gives a clearer image and resists scratches better than acrylic.
• Torque guide: Mirror clamps typically 2–4 Nm. Do not overtighten plastic clamps.
• Price range: Bells AUD $15–$50, mirrors AUD $20–$60.

5. Cargo racks and waterproof panniers

For commuters and delivery riders, a rated rear rack and panniers carry loads safely without a sweaty backpack.

• Rack rating: Look for 25–30 kg load ratings and compatibility with your frame’s eyelets.
• Hardware: M5 x 0.8 bolts, 12–16 mm length, torque to 4–6 Nm. Use medium threadlocker.
• Pannier capacity: 20–30 L per side for commuting. Delivery boxes can be 30–60 L.
• Waterproofing: IPX4 splash resistant for city use, IPX6–IPX7 for heavy rain routes.
• Rail diameter: Pannier hooks usually fit 8–16 mm rack tubes with shims.
• Price range: Racks AUD $80–$200, panniers AUD $60–$200 per bag.

Tip: A bungee net and reflective side panels improve load security and visibility.

6. Puncture protection and a roadside repair kit

Heavier e-bikes stress tyres and rims more, so plan for punctures before they happen.

• Tyres: Choose puncture-resistant casings. Common sizes are 700 x 35–50C, 27.5 x 2.0–2.4, 29 x 2.0–2.4, and 20 x 4.0 for fat-tyre e-bikes.
• Pressures: Commuter 700 x 38C typically 50–70 psi. 27.5 x 2.2 at 28–38 psi. 20 x 4.0 at 12–25 psi depending on load and terrain.
• Protection: Tyre liners or sealant reduce downtime. Consider tubeless where compatible; carry plug strips.
• Kit list: Spare tube, tyre levers, mini pump with gauge or CO2 inflator, patches, and a multi-tool with 2–8 mm hex and T25 Torx.
• Axles: Hub-motor axle nuts often torque to 30–40 Nm with torque washers. Through-axles commonly 10–12 Nm. Always check your bike’s manual.
• Price range: AUD $30–$60 for a kit, $50–$120 per puncture-resistant tyre.

Delivery tip: A frame-mounted pump saves bag space and keeps weight low.

7. Phone mount and USB power for navigation

Navigation and job apps are easier and safer when your phone is stable and in view.

• Mount sizes: Handlebar clamps for 22.2, 31.8, and 35 mm. Some include spacers for perfect fit.
• Vibration damping: Protects phone camera OIS on rough roads.
• Weather: Waterproof cases or IP67 sleeves keep phones safe in storms.
• Charging: Many e-bikes provide 5 V USB at 1–2 A. Use short, quality cables. Avoid overloading auxiliary ports.
• Security: Quick-release mounts let you take the phone at stops.
• Price range: AUD $30–$100 for mounts, $20–$40 for rugged cables.

Essential e-bike accessories checklist

• AS/NZS 2063 helmet and eyewear
• Front and rear lights with reflector
• High-security lock plus wheel security
• Bell and left-side mirror
• Rear rack and waterproof panniers
• Puncture kit, pump, and multi-tool
• Phone mount with USB charging

Where to buy electric bike accessories in Australia

For quality spares and add-ons that fit your Bandit, visit the Bandit Bikes parts store at parts.banditbikes.com.au. You will find lights, racks, tools, and hardware that suit Australian conditions.

FAQs

What e-bike accessories are required by law in Australia?

You must wear an AS/NZS 2063 approved helmet. At night your bike must display a white front light, a red rear light, and a red rear reflector. A working bell or similar warning device is also required. Mirrors are optional but recommended.

How bright should my e-bike lights be, and are flashing modes legal?

For lit streets, 200–500 lumens front is usually sufficient. For dark paths, 500–1000 lumens with a cut-off beam is safer. Rear lights of 20–100 lumens work well. Flashing modes are generally legal, but aim the beam down and avoid dazzling others.

What lock is best for an e-bike?

A Sold Secure Gold or Diamond rated U-lock or heavy chain is best. Use a second cable or chain to secure the front wheel. Lock through the frame to a fixed object, keep the lock off the ground, and consider a discreet GPS tracker.

Conclusion

The right e-bike accessories make daily rides safer, faster to set up, and cheaper to maintain. Prioritise a compliant helmet, powerful lights, a solid lock, visibility gear, cargo capacity, a puncture kit, and a secure phone mount. For Australian riders and delivery pros alike, these upgrades pay for themselves quickly. Explore quality options at parts.banditbikes.com.au and get your Bandit set up right today.